Miniature Painting Starter Kit

Miniature Painting Starter Kit: A Beginner’s Guide

So you want to fight a lot with a lot of plastic figures? And you don’t want it to be just a gray pile? Then a miniature painting starter kit you need.

You will surrender yourself to the most artistic side of tabletop gaming: miniature painting! There is a lot of information about detailing and painting, but how easy is it for a beginner? Follow our steps to find out.

First and foremost, you need the basic material to assemble your models: a knife to loosen the parts of the models from the thrush, possibly also a pair of nippers is useful. Of course, you also need glue, superglue for metal models, and more commonly ordinary plastic glue because most models simply consist of plastic.

Before we paint the miniatures we have to prepare them:

Use a file or knife to cleanly remove the mold lines and pieces of plastic that attached the parts to the frame.

Wash the figures in soapy water. This ensures that any grease and residue is removed from the mold so that the paint adheres better.
Give the figures a good undercoat with a primer. An aerosol can with a black, gray, or white undercoat is made by various miniature manufacturers. This layer ensures that the paint adheres well and that you start with an even undercoat.

The base

The order in which you paint is important. Start with the rough work you need to drybrush for and work your way up to the small details. This way, you’ll avoid accidentally ruining the fine lines you’ve been trying so hard on. You can read more about dry brushing further on.

In addition, it is wise to start with the deep parts of your thumbnail. If you accidentally hit a higher unpainted piece, it’s not that bad. The other way around, this would be more annoying.

Use thin coats, you will often have to apply 2 or 3 coats before the paint is opaque. This is part of the deal, a thick layer often does not cover, but it does become grainy or odd so that your thumbnail will not look neat. Have patience!

Highlights and shading

To add some contrast, we don’t simply block everything with color, but we take into account where the light and shadow fall. Mix a darker color with your base color, and paint the deeper parts with this. Mix a lighter color such as an off-white with the base color, and move along the higher areas where the light hits the thumbnail.

Drybrushing

Drybrushing is an excellent way to quickly paint detail on your miniatures.

First, make sure that the base coat is painted neat and opaque. Then grab a slightly coarser brush that doesn’t have to stay tidy. Mix in a slightly lighter color and pick up some on your brush. Now wipe your brush on some paper, so that there is only a little bit of paint left on your brush.

Move with coarser movements over the part that you want to have dry brushed. The paint will stay on the higher parts. The deep parts will keep its base color.

This technique works great for textured parts such as fur, chain mail, or hair.

miniature painting starter kit

Materials Required for Miniature Painting

The main objective of assembling and painting miniatures, apart from enjoying themselves, finished work of art.

In general, the miniatures will come to you disassembled and divided. Thanks to some assembly illustrations you will be able to turn that plastic mess into a little soldier. But for this you will need:

Precision pliers, which will help you to extract the pieces of the miniature from the matrices without danger of damaging the most fragile elements (such as horns, antennas and ropes). A cutter can also work.
Lima, since many times a plastic burr remains from the manufacturing molds.
Plastic or instant glue, to join the pieces of the miniature with each other.

Miniature Holder For Painting

There are a few different ways to hold miniatures while painting. Having a good grip or something a more appropriate size makes painting a lot more comfortable and also reduces hand cramping.

A holder should therefore be at least the size of a paint pot or, in the case of a handle, open the hand to a certain extent.

You don’t just stabilize your hold with your index finger. You can also support the brush shaft there and thus paint closer to the miniature and that with significantly reduced trembling of the hand. This is especially helpful when you paint a lot of details.

Best Miniature Paint Brushes

Synthetic brushes are resistant to washing and conditioning. Imagine washing a doll’s hair with a regular hair conditioner? It won’t have much of an impact. Synthetic brushes have their uses, however, especially when enamel paints are used, like cleaning and thinning products (most of which are alcohol-based) destroy the hair of a typical brush.

If you use hairbrushes, make sure you clean and condition them thoroughly after each painting lesson. To do this you want to be sure to take a Brush Cleaner and Preserver.

Miniature Painting Starter Kit

Transforming a dull piece of the miniature model into an exciting piece you’re proud to say you created is a process that’s as exciting as when you first held a crayon. A full-color guide to assist in learning the basics of miniature painting, created by a professional artist.

The starter paint kit has all the most needed base colors to get you started with your first miniature painting project.

Miniature Painting Tips

With so much inspiration, you’ll want to get started right away. Now it’s time to paint miniatures – here are my five tips for beginners:

1. Preparation
Painting figures take time and practice. To create a well-lit place where you can work comfortably and without straining your back. The preparation also includes good utensils, such as acrylic brushes, paints, a color palette, a pad, and possibly a holder, such as an old plastic lid, on which you can fix the figures with modeling clay or something similar.

The miniatures also require preparation, especially if you have played with them several times. To wash off dust and grease, you can put them in a water bath enriched with washing-up liquid and in any case, let them dry properly afterward.

2. Primer
A primer is particularly important with plastic. The simplest are dark or black primers as a spray can. I always take a shoebox in which I can spray the figure from all sides. The acrylic paint is elastic and so well suited for soft plastic figures, but still creates enough hold for further layers of paint.

3. Paint
Be sure to let the primer dry well. In any case, several hours. Then you can start painting. It is best to think in advance which main colors would suit the figure and which accent colors go well with it. Determining three main colors is a good rule of thumb so that it ends up being harmonious and not too chaotic – the historical cavalry shouldn’t look like a horde of circus clowns in the end.

It will be easiest if you start with the hard-to-reach areas as well as with the large areas and slowly work your way forward. Brushes of different sizes help a lot with different spots.

Don’t be surprised if the color result is not as desired the first time you apply it. Better to let the paint dry and apply more thin layers instead of working with one thick layer.

4. Shading
The play of light and shadow first breathes life into characters and makes them appear dynamic. Shading is therefore actually a must, but admittedly not that easy.

For the shading, mix the basic color with white and black, one shade lighter or darker. The darker layer is applied thinly to the notched areas, for example in the case of a creased coat, and the lighter shade to the protruding areas. Clothing, hair, muscles and other surfaces appear much more three-dimensional.

5. Top coat
Painting figures is a lot of effort. It is all the more important to protect the work of art in the end. I mainly use matte topcoats to seal my miniatures in the end.

eric
Eric

Eric is the founder of bestfreetime.com. Of course, this is his nickname. In terms of the health of the ongoing projects, his identity is hidden for now. He is known around him as a forward-thinking, creative, innovative entrepreneur.

If you want to share;